Aspro IODM 70 compressors, with theirs comapct design and reduced size are easy to installed guaranteeing a good performance and quick, efficient and safety CNG refilling.
- Inlet pressure: 0,02 to 60 bar (0,29 to 870 PSI)
- Flow: 120 to 1.050 Nm³/h (71 to 618 SCF/m)
- Horizontal reciprocating og 2/3/4/5 stages
- Direct coupling
- Electric motor or gas driven engine
- Power: 55 / 132 kW (75 / 175 HP)
- Air cooled
- Last compression stage condensers
IODM 70 |
2-40 |
2-40m |
3-12 |
3-19 |
4 |
4r |
5-4R |
Type |
Horizontal Reciprocating |
Number of stages |
2 |
3 |
4 |
5 |
Max. suction pressure |
60 Bar (870 PSI) |
60 bar (870 PSI) |
13 bar (189 PSI) |
19 bar (276 PSI) |
8 bar (116 PSI) |
4,4 bar (64 PSI) |
1 bar (14.5 PSI) |
Min. suction pressure |
28 bar (406 PSI) |
28 bar (406 PSI) |
7 bar (102 PSI) |
12 bar (174 PSI) |
4 bar (58 PSI) |
1,5 bar (22 PSI) |
0,02 bar (0,29 PSI) |
Discharge pressure |
250-300 bar (3625-4350 PSI) |
Stroke (mm) |
70 |
Main motor power |
55 / 75 / 90 kW (100 / 125 HP) |
110 / 132 kW (150 / 175 HP) |
Air-cooler power |
2,2 kW x 2 |
3 kW x 2 |
Voltage – Frequency |
380 / 440 vca – 50 / 60 hz |
Speed (RPM) |
1.480 / 1.780 |
Medidas
IODM 70 |
2 / 3 / 4 sin cabina |
2 / 3 / 4 con cabina |
5 sin cabina |
5 con cabina |
5 sin cabina con motor a Gas |
Alto |
1.800 mm / 5′ 11″ |
1850 mm / 6′ 1″ |
2500 mm / 8′ 2″ |
3.100 mm / 10’ 12 |
2100 mm / 6’ 10” |
Ancho |
1950 mm / 6′ 4″ |
3040 mm / 9′ 11″ |
2.800 mm / 9’ 2” |
3.600 mm / 12’ 3” |
1960 mm / 6’ 3” |
Profundidad |
1940 mm / 6′ 4″ |
2.130 mm / 6′ 11″ |
1.960 mm / 6’ 3” |
1.960 mm / 6’ 3” |
4300 mm / 14’ 7” |
Peso (Kg) |
aprox. 2.250-3.600 kg |
aprox. 2.640-3.360 kg |
aprox. 4.600-6.200 kg |
aprox. 6.500 kg |
7.800 Kg |
Opcionales
|
Acoustic enclosure with FLP lighting |
|
Inter-stage temperature transducer |
|
Gas detector |
|
Crankcase oil level sensor |
|
Pre-lubricator |
|
Vent pipe with flame arrester |
|
High – temperature pipes protection |
|
Gas sampling system |
|
Fire fighting system |
|
Lube oil heater |
|
Flame detector |
|
Temperature switch |
|
Gas flow meter |
|
Containers automatic drain |
|
Priority panel for discharge to storage or dispensers |
|
Inlet filter (single or duplex) |
|
Pressure regulating valve with optional low pressure by pass |
|
On board control panel |
|
Inter-stage pressure transducers |
|
Monitoring system |